Louisiana Mills Endure Hurricane Laura

The first major hurricane of the 2020 Atlantic hurricane season, Hurricane Laura, made landfall at peak intensity in Cameron, La. on August 27. The storm was the 10th-strongest U.S. hurricane to make landfall by windspeed on record. The storm caused the deaths of at least 36 people in the U.S. (71 overall). As a Category 4 hurricane, Laura tied the 1856 Last Island hurricane as the strongest hurricane on record to make landfall in Louisiana. While most of the severe damage was in south Louisiana, farther inland, loggers and mills had troubles with downed power lines, split and cracked trees and no access to supplies. In most affected areas, power was out for an average of five days. Some areas were still without power in mid-September as storm surge and rain knocked grids completely off.

Loggers across north Louisiana were quick to respond to community needs according to Louisiana Loggers Assn. Executive Director Toni McManus McAllister, adding that in many places across the state, loggers were the first to respond and jump out to help and clear roads and houses of debris; things were tough, she says, but notes how resourceful loggers are by nature and therefore how resourceful their communities are even under extraordinary conditions. The storm inflicted an estimated $10 billion in damages along the Louisiana-Texas border near the Gulf of Mexico and northward.

Annmarie Sartor, communications officer with Drax Biomass, says she grew up in south Louisiana and never imagined a hurricane would do so much damage this far north. The home to Drax’s headquarters, the city of Monroe, didn’t fare well in terms of wind damage and numerous old oaks littered the streets. While Sartor says she was surprised by the damage, each of Drax’s production facilities at LaSalle and Morehouse, La. were idled as a precautionary measure; however they are now back up and running once power was restored to the area. Drax’s Amite BioEnergy plant in Gloster, Miss., remained operational throughout the downtime associated with Hurricane Laura, as it was not affected by the storm.

Sawmill LaSalle Lumber, located next to Drax’s LaSalle facility, did not suffer any physical damage, President Richie LeBlanc reports, addding that unfortunately some employees had minor damage to their homes, but most importantly all were safe through the storm. LaSalle’s ownership group includes Hunt Forest Products, which operates a plywood facility in Pollock, La. LeBlanc says the hurricane crippled the power grids and both Pollock Plywood and LaSalle Lumber lost production time as a result. “Bottom line is we were very fortunate,” he says.

Following the direction of other Louisiana mills, RoyOMartin stopped production at three facilities 12 hours before Laura moved ashore. Terry Secrest, vice president of manufacturing and product sales, says the move was to protect employees, sending them home to be safe with their families. “The storm devastated much of southwest Louisiana and impacted our two Louisiana manufacturing facilities: our Oakdale OSB plant and Chopin plywood and timber mill. Both plants had some minor wind damage, but overall, they fared well. The largest impact was the loss of power for about five days,” Secrest continues.

RoyOMartin’s large OSB facility in Corrigan, Tex. was not impacted and restarted the next day. No RoyOMartin employees or their families were harmed.

Latest News

Housing Starts Show Modest Decline In September

U.S. housing starts dipped slightly in September to a seasonally adjusted rate of 1.555 million, down 1.6% from August, but 7.4% above September 2020, according to the U.S. Census Bureau and U.S. Dept. of Housing and Urban Development monthly…

Mellott Manufacturing Log Flare Butt Reducer

By customer request Mellott Manufacturing Co., Inc. is now offering the model 70E log flare butt reducer—designed and built with the same rugged quality as the LMR debarkers and all the Mellott product lines. Adding a log flare butt reducer to a mill infeed system will vastly reduce log handling problems…

Wood Fiber Group Merges With USNR

USNR and Wood Fiber Group have announced their merger. USNR is an industry-leading global supplier of sawmill and plywood mill machinery, aftermarket parts, and technical and engineering services. Wood Fiber Group is the largest supplier of cutting tools and filing room equipment to the wood products…

Industry Patriarch Varn Passes

George W. Varn, Sr., who broke into the family turpentine business following World War II, and then along with a cousin built a chip mill and a sawmill in the late 1960s in Hoboken, Ga., called Varn Wood Products, and who became one of the patriarchs of the southern pine lumber industry, died September 4 in St. Vincent’s Hospital in Jacksonville, Fla., the same hospital…

Find Us On Social

Newsletter

The monthly Timber Processing Industry Newsletter reaches over 4,000 mill owners and supervisors.

 

Subscribe/Renew

Timber Processing is delivered 10 times per year to subscribers who represent sawmill ownership, management and supervisory personnel and corporate executives. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative.