Keith Introduces New RX Technology To Improve Walking Floor Trailers
Keith Manufacturing Co. has unveiled its new RX technology platform, the company’s first major redesign of its Walking Floor drive system in more than a decade. Developed to improve reliability, simplify maintenance, and increase unloading efficiency, the new platform includes two drive options, with the RX2 designed specifically for most wood-products hauling applications.
According to Keith, the RX Technology platform was built by addressing common issues identified through years of field experience. The redesigned drive eliminates several adjustment-intensive components found on previous systems, reducing potential wear points and helping deliver more consistent performance over time.
One of the most notable changes is a cartridge-style check valve system that allows components to be replaced quickly using a single wrench, reducing service time and trailer downtime. The platform also incorporates integrated temperature sensors and automatic over-temperature protection to help prevent hydraulic damage caused by excessive oil heat—a common source of premature system failures.
The RX2 introduces a two-cylinder drive design that unloads a standard 48-ft. trailer in approximately four minutes while reducing overall system weight. The lighter design allows operators to maximize payload capacity without sacrificing durability.
Keith also redesigned the floor configuration, utilizing an 80% moving and 20% stationary slat arrangement to improve push force while reducing hydraulic strain. Combined with a simplified hydraulic circuit and high-flow filtration system, the result is a cleaner-running drive with fewer potential leak points and lower maintenance requirements.
The company says these improvements can help reduce total cost of ownership for fleets operating high-mileage trailers in demanding mill environments.
The RX platform also features an updated electric control system with optional manual override and simplified single-action controls intended to reduce operator training time and minimize user error.
For operators hauling chips, sawdust, and other residual materials, Keith recommends pairing the RX2 with its CleenSweep tarp system. The system automatically pulls a tarp across the trailer floor during unloading, helping remove residual material, reducing manual cleanout, and speeding trailer turnaround.
While the RX2 is expected to meet the needs of most chip and biomass fleets, Keith also introduced the RX3, a three-cylinder drive unit designed for higher-density materials and more demanding duty cycles.
The RX Technology platform represents the next generation of Keith’s Walking Floor systems, with a focus on improving reliability, reducing maintenance, and helping fleets move more material with less downtime.
The new RX Drive is scheduled to be available in October 2026.
Latest News
U.S. Housing Starts Boom In November
U.S. housing starts—single-family and multi-family combined—made their largest monthly increase in 2023, jumping 14.8% in November over October to a rate of 1.560 million. Single-family starts in November were at a rate of 1.143 million, a whopping 18% above October, while multi-family was 404,000 in November, up nearly 9% over October…
Weyerhaeuser Enhances Coastal Holdings
Weyerhaeuser Co. entered into two agreements with Forest Investment Associates to divest 69,600 acres in upstate South Carolina for $170 million, and to purchase 60,700 acres of high-quality timberlands in coastal North Carolina, South Carolina and Mississippi for $163 million…
Boise Cascade Curtails Chapman Sawmill
Boise Cascade announced an indefinite curtailment of its lumber production in Chapman, Ala. The curtailment will affect 80 positions. The plywood operations at the Chapman location are not part of the curtailment. Worker Adjustment and Retraining Notification (WARN) Act notification was provided to impacted employees and specifies that operations will cease on January 28, 2024…
WWPA’s Mathews Leaves A Legacy
James R. Mathews, known by most as Jim, was a WWPA Lumber Inspector and Master Lumberman, but is most remembered by his colleagues and those in the industry as a great friend and mentor. He died at the age of 74. Mathews spent 42 years working in the lumber industry. He began his career with Weyerhaeuser Co., Klamath Falls, Oregon in 1970. He worked in most of the planer mill positions until moving into the lumber grading department as a student grader in 1972…
Find Us On Social
Newsletter
The monthly Timber Processing Industry Newsletter reaches over 4,000 mill owners and supervisors.
Subscribe/Renew
Timber Processing is delivered 10 times per year to subscribers who represent sawmill ownership, management and supervisory personnel and corporate executives. Subscriptions are FREE to qualified individuals.
Advertise
Complete the online form so we can direct you to the appropriate Sales Representative.